As it should be. LED control equipment.

Light control

On. Off. Dim. Change colour. Control light. Essential. Comfortable. Intelligent.

Typical Schlüter quality: we also offer high-quality system components for light control.

Here's how that works: intelligent receivers are operated via radio switches. The receivers control the LED strips. The power supply units convert the mains voltage to 24 V, as required for our LED strips.

Since the switching is wireless, installation and wiring needs are significantly reduced. The transmitter selection depends on the type of LED strip or receiver in use.


Schlüter-LIPROTEC Bluetooth/radio control

Schlüter-LIPROTEC-EBR are Bluetooth receivers for installations with our innovative illuminated profile technology. The new Schlüter-LIPROTEC-EBR 1 and -EBR 4 receivers are either operated via a remote control included in the scope of supply or via mobile end devices such as smartphones and tablets. An attractive wall holder with a magnetic attachment system accommodates the remote control.

remote control and smartphone with app Schlüter-LED-Color-Control

Schlüter-LIPROTEC-EKE – power supplies

Reliable power supplies convert the mains voltage to 24 V, as required by our LED strips. They are easy to install and available in different wattages from 30 to 200 W for LED strips up to 18 linear metres.


Schlüter-LIPROTEC-ER – receiver – receive and convert

Receivers transpose the wireless signals from the switch into commands for the LED strips.

  • LTER1 (on-off-dimming) for controlling white LED strips with fixed colour temperature.


Schlüter-LIPROTEC-E – switch (transmitter)

Users can control the illuminated profile technology with switches. The radio control makes installation particularly easy. All switches are available in two different frame design options:

  • genuine glass, rear-lacquered, brilliant white
  • brushed stainless steel V4A

The switches are available in the following versions: 

  • 1 channel (on, off, dim) for controlling white LED strips with fixed colour temperature together with receiver LT ER 1
  • 2 channel (on, off, dim) for simultaneous control of 2 receivers LT ER 1 with white LED strips and fixed colour temperature

Questions and answers

  • Do I need an electrician for the cabling?

    We also offer complete accessories for the cabling. Particularly practical: The Schlüter-KERDI- BOARD installation modules with pre-milled cable channels. They can accept the two-part Schlüter-LTZKK2010 cable channel. The cables are simply inserted into the channel from the front. During the installation the tile setter will route the cable feeds to the individual LED strips. The tile setter can also clamp the individual LED strips together and connect the receiver as well as take care of the connection to the secondary (24 V) electricity supply of the power supply unit. The advantage: No trade must wait for the other.

    However, only an electrician may connect the converter to the power mains.


Show all questions