We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information



Plug & play accessories

The Schlüter plug & play system significantly facilitates the combination of individual components. An overview of the available accessories can be found here.


Power supplies

Power supplies convert the mains voltage to the 24 V required by our LED strips. They are easy to install and available in different wattages from 30 to 100 W for LED strips in lengths of up to 6/18 linear metres. They feature a connection cable with a European plug as well as plug & play connectors for our Schlüter-LIPROTEC-EASY system.


Schlüter-LIPROTEC-PEKE is a plug & play power supply 24 V DC with a European plug and a plug & play connector.

Available wattages (max. Watt*)

  • 30 (27)
  • 50 (45)
  • 75 (67,5)
  • 100 (90)

*A safety reserve has to be taken into account when selecting the power supply unit (see maximum load of the corresponding power supply unit).




Schlüter-LIPROTEC-PZK is a plug & play cable in lengths of 3 and 5 m for connecting the power supply unit of the Bluetooth receiver and the plug & play LED module.

Available lengths (in cm):

  • 300
  • 500

Note: Maximum combined cable lengths should not exceed 10 m.



Schlüter-LIPROTEC-PZV is a plug & play distributor for connecting 2 or 4 additional plug & play LED modules to an installation.

Available connections:

  • 2
  • 4


Further accessories


Schlüter-LIPROTEC-PZH is a hollow wall junction box with a pre-attached Schlüter-KERDI waterproofing collar for use in tile coverings. It forms a hollow space for plug connections that enables the reversible design of plug & play LED modules and is attached with a suitable tile adhesive or with Schlüter-KERDI-COLL.


Schlüter-PROCUT is a special cutting tool for precisely cutting LED strips to size. To maintain IP-compliant waterproofing when cutting the LED strip, the LED strip must be cut at a 45° angle and closed with the end cap and sealing adhesive included in the set.

Illustrated pricelist LIPROTEC 2019
Additional information

LIPROTEC brochure

Brochure as PDF